Network Dome Camera ·
Quick Start Guide
11
11
●
The foam ring around the lens must be seated flush against the
inner surface of the bubble to isolate the lens from the IR LEDS.
Fasten the dome cover to camera body so that the foam ring
and the dome cover are attached seamlessly.
2.1
Ceiling Mounting
Steps:
1.
Drill the screw holes and the cable hole in the ceiling according to
the supplied drill template.
Drilling Template
Screw hole 1:for Mounting Base
Hole A:for cables routed through the ceiling
FRONT
A
1
Cable Outlet
1
1
Figure 2-1
Drill Template
2.
Hammer the supplied screws to the ceiling.
Do not install the screws into the ceiling completely. It is
recommended you install only enough of a screw into the ceiling,
so as to hook the camera to the screws.
