Network Bullet Camera
·
Quick Start Guide
14
14
Please insert the expansion screws first if the camera is mounted to
the cement ceiling. And you can use the self-tapping screws
directly if camera is mounted to the wooden ceiling.
Install the Camera
3.
Adjust the surveillance angle.
1).
Loosen No.1 lock screw to adjust the tilt angle [0 °~100°].
2).
Loosen No.2 lock screw to adjust the pan angle [0°~360°].
3).
Loosen No.3 lock screw to rotate the camera [0°~360°].
4).
Tighten the lock screws.
A wrench is supplied to loosen and tighten the screws.
