10
Adventure Kings Generator
2) ENGINE OIL REPLACEMENT
1. place the machine on a level surface and warm up the engine
for several minutes. Then stop the engine and turn the fuel cock
knob to “oFF””. Turn the fuel tank cap air vent knob clockwise.
2. loosen the screw and remove the cover.
3. remove the oil filler cap
4. place an oil pan under the engine. Tilt the generator to drain the
oil completely
5. replace the generator on a level surface.
6. add engine oil to the upper level.
7. install the oil filler cap
8. install the cover and tighten the screw
recommended engine oil: (see page 14)
SAE10 W30
CAUTION:
• be sure no foreign material enters the crankcase.
• do not tilt the generator when adding engine oil. This could
result in overfilling and damage to the engine
• clean the oil filter every other 100hr.
3) AIR FILTER
Maintaining an air cleaner in proper condition is very important.
dirt induced through improperly installed, improperly serviced, or
inadequate elements damages and wears out engines.
Keep the element clean at all times
1. remove the cover.
2. remove the air filter cover and element.
3. wash the element in solvent and dry.
4. oil the element and squeeze out excess oil. The element should
be wet but not dripping.
5. insert the element into the air filter.
6. install the cover
CAUTION:
• The engine should never run without the element;
excessive piston and/or cylinder wear may result.
5. PERioDiC MAiNtENANCE (contd)
Summary of Contents for 2000i
Page 19: ...18 Adventure Kings Generator ...
