Advantech WISE-S100, User Manual

Page: 4 / 32

WISE-S100 Series User Manual iv
Warnings, Cautions and Notes
Document Feedback
To assist us in making improvements to this manual, we would welcome comments
and constructive criticism. Please send all such - in writing to: support@advant -
ech.com
Package List
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.

1 x WISE-S100 Stack Light Monitoring Sensor

3 x Plastic Tie

1 x 2m Cable

1 x WISE-S100 Startup Manual

1 x China RoHS Declaration
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
Disconnect power before making any configuration changes. The sudden rush of
power as you connect a jumper or install a card may damage sensitive electronic
components.
Warning!
Warnings indicate conditions, which if not observed, can cause personal
injury!
Caution!
Cautions are included to help you avoid damaging hardware or losing
data. e.g.There is a danger of a new battery exploding if it is incorrectly
installed. Do not attempt to recharge, force open, or heat the battery.
Replace the battery only with the same or equivalent type recom -
mended by the manufacturer. Discard used batteries according to the
manufacturer's instructions.
Note!
Notes provide optional additional information.
Note! The 2m cable is installed on WISE-S100 in default package.