Advantech WISE-S100, User Manual

Page: 24 / 32

WISE-S100 Series User Manual 16
4.4 Light Sensor Data
State count and State duration will clear to 0 after clear command from Modbus/RTU
or serial protocol.
Frequency accuracy is: (x: actual frequency)
Faster blink: ±0.02*(x^2), x > 1
Slower blink: ±0.1*(x^2), x

1
4.5 LED Indicator
There is only one LED for module status indication.
4.6 RS-485 Modbus/RTU

Modbus/RTU communication configuration (only configurable in serial protocol
mode)

Modbus/RTU general Configuration (only configurable in serial protocol mode)

Modbus/RTU Address (not modifiable)
See Appendix I
Values Setting parameters
State
(High/Low/Slow blink/Fast blink)
Frequency
State count

Keep last value
State duration (unit: 0.1s)

Keep last value
Illumination

Enable option if serial protocol mode
LED Color Indication Behavior
Status Green
Steady On Modbus/RTU Mode
On for 5 secs Serial Bus Mode (power saving)
Blinking(2Hz) Sensor Initial Error
Parameter Description Default
Baud Rate The baud rate used 9600
Data Bits The number of data bits used 8
Parity The scheme of parity used None
Stop Bits The number of stop bits used 1
Parameter Description Values Default
Modbus ID The modbus ID used 1~255 1