manualshive.com logo in svg

Advantech WISE-4470 Series, User Manual

Share
Download
Advantech WISE-4470 Series User Manual Download Page 31

23

WISE-4471 Series User Manual

Chapter 4

S

ystem

Configuration

4.2.6

I/O Status Configuration

4.2.6.1

Digital Input

Status

The value of all digital input channels can be determined from the related LED dis-
play in the DI tab (green LED = "logic high"; grey LED = "logic low").

Configuration

The digital input channels support several operation modes and can be configured
from this page.

Channel:

 Select the channel to be configured.

Tag Name:

 Each channel can be given a tag name for identification.

Mode: 

The operation mode of each channel can be configured here, or chan-

nels can be disabled to improve the performance of enabled channels. After a 
channel has been configured, pressing 

Submit

 at the end of this page will apply 

the changes.

Channel Mask: 

Each channel can be disabled individually for reducing date 

traffic during communication.

Refresh: 

Refresh the configuration.

Summary of Contents for WISE-4470 Series



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands