manualshive.com logo in svg

Advantech WISE-4470 Series, User Manual

Share
Download
Advantech WISE-4470 Series User Manual Download Page 26

WISE-4471 Series User Manual

18

4.1

Connection

1.

Open the rubber cover on the side of module, then you will see the micro SIM 
card socket. Please insert you SIM card here and be noted that only micro SIM 
can be used.

2.

Download and install USB driver form https://www.silabs.com/products/develop-
ment-tools/software/usb-to-uart-bridge-vcp-drivers

3.

The USB port is for configure in following steps. Please insert micro-B USB 
cable here and be noted that it don’t provide power for WISE module.

4.

Plug a DC power source into the +Vs, -Vs pin of your module to turn on the 
power.

4.2

Configuring WISE-4471 Using WISE Studio

4.2.1

Minimum System Requirements

The minimum system requirements for WISE Studio are as follows:

Microsoft Windows 7 or above

Internet Explorer 11 or above

4.2.2

Installing WISE Studio

The latest version of WISE Studio is available on the Advantech support site: http://
support.advantech.com/. To install the program, download the installation file and
execute it locally.

Summary of Contents for WISE-4470 Series



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands