Advantech VEGA-1000, User Manual

Page: 3 / 28

iii VEGA-1000 User Manual
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
type of cable is available from Advantech. Please contact your local supplier for
ordering information.
Test conditions for passing include the equipment being operated within an industrial
enclosure. In order to protect the product from damage caused by electrostatic dis -
charge (ESD) and EMI leakage, we strongly recommend the use of CE-compliant
industrial enclosure products.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A dig -
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro -
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera -
tion of this equipment in a residential area is likely to cause harmful interference. In
such cases, users are required to correct the interference at their own expense.
FCC Class B
This equipment has been tested and found to comply with the limits for a Class B dig -
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro -
vide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interfer -
ence to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interfer -
ence to radio or television reception, which can be determined by turning the equip -
ment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation distance between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

Consult the dealer or an experienced radio/TV technician for assistance.
FM
This equipment has passed FM certification. According to the National Fire Protec -
tion Association, work sites are categorized into different classes, divisions, and
groups based on hazard considerations. This equipment is compliant with the specifi -
cations for Class I, Division 2, Groups A, B, C, and D indoor hazards.