![background image](http://html.mh-extra.com/html/advantech/vega-1000/vega-1000_user-manual_3047977023.webp)
15
VEGA-1000 User Manual
C
ha
pte
r 4
O
pe
ra
tio
n
1.
HDMI
For input/output mapping, drag the input device icon to the output device icon.
After mapping, use the Device ID to select a device and set the video mode.
Users can choose between three switching modes: General, Genlock, and
Fastswitch.
General: follow the previous setting
Genlock: bypass HDR
Fastswitch: choose from three preset resolutions (does not support HDR)
Users can also click “Start” or “Stop” to start/stop the video. To disconnect the
device input and output, click “Leave”.
2.
Display Wall
First, select the target device using the Device ID. Then set the output resolution
and the display wall split method (horizontal/vertical). Both methods support up
to 8 x 8 displays. The range can be set via the “Number” field.
The wall dimensions can be defined by adjusting the orange frame on the left
(as shown below), or by inputting specific parameters. After configuration, click
“Preview” or “Apply” to implement the settings.
Summary of Contents for VEGA-1000
