Advantech UNO-3272G Series User Manual Download Page 55

Page: 55 / 64

UNO-3272G User Manual

Chapter 3

MI BIOS

Setup



Network Stack

This item allows users to enable or disable for "Network Stack" (For using UEFI
PXE function, please enable this item).

3.2.2.11

CSM Configuration



CSM Support

This item allows users to enable or disable for "CSM Support".



GateA20 Active

This item allows users to set Upon Request or Always for "GateA20 Active".



Option ROM Messages

This item allows users to set Force BIOS or Keep Current for "Option ROM
Messages".



Boot option filter

This item allows users to set UEFI and Legacy or Legacy only or UEFI only for
"Boot option filter". (For using Legacy PXE function, please set to "UEFI" or"
UEFI and Legacy" mode.)



Network

This item allows users to set Do not launch or UEFI or Legacy for "Network".
(For using Legacy PXE function, please set to "UEFI" mode.)



Storage

This item allows users to set Do not launch or UEFI or Legacy for "Storage".



Video

This item allows users to set Do not launch or UEFI or Legacy for "Video".



Other PCI devices

This item allows users to set Do not launch or UEFI or Legacy for "Other PCI
devices".

Summary of Contents for UNO-3272G Series

































































Search results

Summary of Contents for UNO-3272G Series

Reviews:

Related manuals for UNO-3272G Series

Brands by name

Popular brands

Advantech UNO-3272G Series, User Manual

Search results

Summary of Contents for UNO-3272G Series

Reviews:

Related manuals for UNO-3272G Series

Brands by name

Popular brands