Advantech UNO-2160, User Manual

Page: 20 / 40

UNO-2160 User Manual 14
2.8 PCMCIA: PC Card Slot
The UNO-2160 provides one PC Card slot that supports CardBus (Card-
32) cards and 16-bit (PCMCIA 2.1/JEIDA 4.2) card standards. It supports
+3.3 V, +5 V and +12 V @ 120 mA working voltage. The PC Card is
85.6 mm long by 54 mm wide (3.37" x 2.126"), use a 68-pin connector
and a removable module standardized by PCMCIA that is known as
“PCMCIA card.”
PS: PCMCIA interrupt assignment is IRQ 9.
2.9 VGA Display Connector
The UNO-2160 provides a VGA controller (Chipset VIA Twister chip
with Integrated S3 Savage4 2D/3D Video Accelerator) for a high resolu-
tion VGA interface. It supports VGA and VESA, up to 1280 x 1024 @ 8
bpp / 1024 x 768 @ 16bpp resolution and up to 32 MB shared memory.
The VGA interface is reserved for system testing and debugging. The
UNO-2160's JP8 is a 6-pin mini connector and CN7 is a 15-pin connector
for a VGA monitor. A VGA cable is attached to convert from a 6-pin
mini connector to standard VGA connector. You can choose one of the
VGA interfaces for system testing and debugging. Pin assignments for
the VGA display are detailed in Appendix A.9.