Advantech UNO-2160 User Manual Download Page 2 | Manualshive

Page: 2 / 40

background image

UNO-2160 User Manual

ii

Copyright

This document is copyrighted, © 2004. All rights are reserved. The origi-
nal manufacturer reserves the right to make improvements to the products
described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmit-
ted in any form or by any means without the prior written permission of
the original manufacturer. Information provided in this manual is
intended to be accurate and reliable. However, the original manufacturer
assumes no responsibility for its use, nor for any infringements upon the
rights of third parties that may result from such use.

Acknowledgements

IBM, PC/AT, PS/2 and VGA are trademarks of International Business
Machines Corporation.
Intel® and Pentium® are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft
Corp.
C&T is a trademark of Chips and Technologies, Inc.
All other product names or trademarks are properties of their respective
owners.

Support

For more information on this and other Advantech products, please visit
our websites at:

http://www.advantech.com

For technical support and service, please visit our support website at:

http://www.advantech.com/support/

This manual is for UNO-2160.

Part No. 2002160000

1st Edition, Printed in Taiwan Jan. 2004

«
1
2
3
4
...
»

Summary of Contents for UNO-2160









































Reviews:

No comments

Related manuals for UNO-2160

7000-2 - Escalade RAID Controller

Brand: 3Ware Pages: 2

Origami 4M-006-01

Brand: 4 Moms Pages: 28

Brand: Lattice Semiconductor Pages: 26

Brand: Datavideo Pages: 17

Brand: Datamax Pages: 22

Tissue-Tek TEC 6

Brand: Sakura Seiki Pages: 6

Brand: U.S. Divers Pages: 22

Brand: Vaillant Pages: 52

Brand: Vaillant Pages: 11

Brand: Abov Pages: 138

Brand: Reliance Foundry Pages: 3

Brand: Wesa Pages: 8

LDSBus LC020101A-F

Brand: BRT Systems Pages: 15

Brand: GeoVision Pages: 21

Brand: Penn Pages: 10

Brand: K&K Pages: 10

MorphoAccess VP MD

Brand: Idemia Pages: 29

Brand: Pfeiffer Vacuum Pages: 100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands