![background image](http://html1.mh-extra.com/html/advantech/ubiq/ubiq_user-manual_2856809009.webp)
3
UbiQ Scenario Manager User Manual
Chapter 1
Introduction
1.2.1.3
UbiQ Scenario Manager Software Utility
UbiQ Scenario Manager utility is used remotely to configure and control UbiQ plat-
form. When using UbiQ-230 in the first time, you must configure the name and IP
address for the UbiQ device. And you need to add the controllers/devices connected
UbiQ, if these controllers/devices are not in the default list. Then you could add these
controllers/devices to UbiQ and test them by the UbiQ Scenario Manager utility.
1.3
Installation
Web server and C script engine is built-in on UbiQ platform. So you don’t install any-
thing in the UbiQ product.
UbiQ Remote Scenario utility is the client for configuring and controlling UbiQ devices
remotely, you must install it into a PC system.
1.3.1
PC System Requirements
OS : Microsoft Windows XP
RAM : at least 128 MB memory
Disk space: at least 4 MB space
CPU: Intel Pentium II processor 400 MHz or higher
Display: VGA resolution or higher
Microsoft-compatible mouse
Ethernet port
1.3.2
Installing UbiQ Scenario Manager Utility
UbiQ Scenario Manager utility ships with an installation program that helps you install
the program to your computer.
Installation can normally be completed within two minutes.
1.
Run the UbiQ Scenario Manager utility installation program at:
d:\Scenario\setup.exe
where “d” is the drive letter of your CD-ROM drive.
2.
The
Welcome
screen loads. Click the
Next
button.
Summary of Contents for UbiQ
