![background image](http://html.mh-extra.com/html/advantech/trek-60/trek-60_user-manual_3048067022.webp)
TREK-60 User Manual
12
2.3 Installation
To install the device, first connect the TREK-60 power input port to the vehicle ignition
system. The power cable should be to connected directly to the battery. This allows
TREK-60 to be powered on/off via the device power button or vehicle ignition signals.
2.3.1 Connecting the Power Cord
Connect the VI/O cable to the TREK-60 VI/O connector. At the open-wire end, one
pin marked “+” is reserved for positive voltage and must be connected to the “+” con
-
nector on the power side; one pin marked “-” is reserved for grounding and must be
connected to the “-” connector on the power side. Finally, one pin marked “ignition” is
reserved for ignition signals.
Connector Part Number: GT25H2-16DP-2.2H, HRS 775-0089-4
Plug Part Number: GT25-16DS-HU/R / GT25H-2024SCF
2.3.2 Wake-On-Ignition
For the wake-on-ignition function, there is a 5 second delay from when the vehicle
ignition is turned on to the TREK-60 device being powered on. This is designed to
ameliorate the impact of power fluctuations, which could damage the device.
Note!
TREK-60 supports 12/24 V
DC
input power.
The default setting is 9 ~ 32 V
DC
.
Note!
Ignition on/off setting: TREK-60 supports ignition on/off function, which
allows the device to be powered on/off via the vehicle ignition signals.
Summary of Contents for TREK-60
