SOM-5993 User Manual
10
Baud rate up to 115.2K
1.3.9.10
TPM
TPM 2.0 module by optional support.
1.3.9.11
Smart Fan
Supports 2 x fan PWM control signal and 2 x tachometers input for fan speed detec
-
tion. Provides 1 x on module with connector and 1 x on carrier board following
PICMG COM Express R3.0 specifications.
1.3.9.12
BIOS
BIOS chips are on module by default. This allows the user to place BIOS chip on the
carrier board with appropriate design and jumper settings on BIOS_DIS#[1:0].
Notice: If the system CMOS is cleared, we strongly suggest going to the BIOS setup
menu and loading default settings following the first boot up.
Purpose: The standard module has no jumper at SCN1. Therefore, the BIOS settings
are maintained without a RTC coin battery. If you need to restore the BIOS default
settings, please follow the steps below:
BIOS_DIS0#
BIOS_DIS#1
Boot up destination/function
Open
Open
Boot from Module’s SPI BIOS
GND
Open
Boot from Carrier Board LPC/FWH BIOS
Open
GND
SPI_CS0# to Carrier Board, SPI_CS1# to Module
GND
GND
SPI_CS0# to Module, SPI_CS1# to Carrier Board
Clear CMOS
Setting Type
Jumper Setting Clear RTC CMOS (Time &
Date)
BIOS Setting Load
Default
Default Setting
Without jumper V
NA
Optional Setting Jumper 1-2
V
V
Summary of Contents for SOM-5993
