Advantech SOM 144, Design Specification

Page: 28 / 40

2 2 SOM 144 Design Specification Rev. 1.0
4.1.3 Recommand Component Suppliers
At least 3.0 mm height is needed between the carrier board's
surface and the bottom of SOM 144 Modules.Therefore,
SODIMM socket must meet this requirement and so as the recom-
mended board -to-board connector. Some suggested suppliers are
listed below.
4.1.4 SODIMM Layout
Figure 4-3: 144-pin SODIMM Layout
Componet Model No. Supplier
Recommended
80-pin front-end
connectors
FX8C-80P-SV Header
FX8C-80S-SV Receptacle
Hirose
SODIMM socket C-390112 AMP