SmartStart SL305
5.8.3
Antenna Connector ANT, DIV and WiFi
The main and diversity antennas are connected to the router using the SMA connector
on the front panel. There is also an R-SMA antenna connector available, through which an
additional antenna can be connected, if the router is equipped with a WiFi module.
The
ANT
connector is used to First, connect the main antenna to the router. To connect the
diversity antenna, the second antenna connector
DIV
is used. An R-SMA connector named
WiFi
is designed for the connection of a WiFi antenna (available only for versions with a WiFi
module).
The router can not operate without a main antenna connected through the port marked
as
ANT
!
An SMA connector is used for the connection of the antenna. The antenna is connected by
screwing this antenna to the SMA connector on the router’s front panel (see the figure below).
Recommended tightening moment is 0.9 Nm.
Figure 18: Connecting the antenna
A diversity antenna improves the radio capability of the router at low signal strength.
19