____________________________________________________________________________________________________
SKY-8260S Manual V02 20220411
Copyright 2022 Advantech Co. Ltd. All rights reserved.
Page 87
Figure 3-40: Air Filter Assembly
To install the air filter, make sure the left side of latch insert into the front bezel with an
angle of approximate 30°, and press the air filter downward.
After inserting the air filter, tighten the thumb screw.
3.5.2 PSU Modules
Note!
You need:
- no special tools
- A spare PSU module
To replace a PSU module, proceed as follows:
1.
Locate the PSU module to be replaced (failing / degraded).
2.
Remove the power cord from the PSU power connector.
3.
Grab the PSU handle and unlock the PSU module by pulling the PSU lock to the
left.
4.
Hold the lock and extract the PSU module towards you.
5.
Insert a new PSU module into the bay. Make sure the module is fully seated.The
lock will flip to the right automatically when the module is seated.
6.
Connect the power cord.
7.
The PSU module should start operation and the PSU Status LED should turn green
