____________________________________________________________________________________________________
SKY-8201L Manual V02 2018420
Copyright 2016 Advantech Co. Ltd. All rights reserved.
Page 92
3.5.2 Disk Drives
3.5.2.1 2.5
” HDD
Note!
You need:
-
A PH2 screw driver
-
A standard 2.5
” HDD/SSD
To remove the HDD, proceed in the reverse of the installation procedure in
1. Open the front cover.
2. Unlock the tray by moving the lock
DT1
to the left. Push the tray’s black button
DT4
to open the tray handle.
3. Grab the tray handle and pull it evenly towards you.
4.
Remove the 2.5” drive mounting screws.
5. Install a new HDD by following the instructions in
3.5.2.2 M.2 SSD
Note!
You need:
-
A PH1 screw driver
-
A standard M.2 SSD
-
Power down the unit
To remove a M.2 SSD proceed in the reverse of the installation procedure in
section
3.3.4.3
:
1. Remove the top cover and PCIe card cage
2. Locate the M.2 SSD to be replaced
3. Remove the M.2 mounting screws. Please be sure to hold the last screw as the
spring mechanism in the M.2 connector will flip the M.2 module upwards once the
screw is lose.
4. Extract the M.2 module
Install a new SSD following the mounting instructions of the same section.
3.5.3 DIMMs
Note!
You need:
-
No special tools
-
Power down the unit
As a preparation you need to remove the top cover, PCIe card cages and the stiffener
plate as described earlier.
Summary of Contents for SKY-8201L Series
Page 2: ......
