____________________________________________________________________________________________________
SKY-8201L Manual V02 2018420
Copyright 2016 Advantech Co. Ltd. All rights reserved.
Page 85
5.
Install the 2.5
” drive using four screws contained in the disk screw kit as shown
below. Be careful when inserting the drive to not damage the disk light pipes at the
bottom of the tray. Keep the screws loosely inserted into the threads until all four
screws have been inserted. Then tighten the screws one after the other.
Figure 3-28: Mounting the Drive in the Disk Tray
6.
Insert the tray into the disk bay until the drive engages with the connector on the
SAS backplane. Now close the handle and lock the tray by pushing the lock DT1
to the top.
3.3.4.2 3.5
” HDD/SSD Drives
Note!
You need:
- A PH2 screw driver
- A standard 3.5
” HDD/SSD
1.
Locate the disk tray you want to install the disk.
2.
Move the lock DT1 to the right to open the tray handle.
Summary of Contents for SKY-8201L Series
Page 2: ......
