____________________________________________________________________________________________________
SKY-8201L Manual V02 20180420
Copyright 2016 Advantech Co. Ltd. All rights reserved.
Page 86
3.
After tray handle is opened, grab the tray handle and pull it evenly towards you.
4.
Install the 3.5
” drive using four screws contained in the disk screw kit as 2.5” drive.
Be careful when inserting the drive to not damage the disk light pipes at the bottom
of the tray. Keep the screws loosely inserted into the threads until all four screws
have been inserted. Then tighten the screws one after the other.
5.
Insert the tray into the disk bay until the drive engages with the connector on the
SAS backplane. Now close the handle and the tray will be automatically locked.
3.3.4.3 M.2 SSD
Note!
You need:
- A PH1 screw driver
- A standard M.2 SSD
- 1 M.2 mounting screws (included in the unit)
1. Remove the left PCIe card cage
CG2
2. Make sure the M.2 disk is compliant with the socket and that the mechanical keys
match.
3.
Insert the m-SATA SSD with an angle of approximate 33° in the slot. Press the
m-SATA SSD downwards.
4.
Install and fasten the fixing screw.
Summary of Contents for SKY-8201L Series
Page 2: ......
