Advantech RSB-4221, User Manual

Page: 42 / 80

RSB-4221 User Manual 32
[ 107.264959] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 107.273319] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 107.281608] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 107.289891] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 109.283868] mlan: module license 'Marvell Proprietary' taints kernel.
[ 110.348424] wlan: Loading MWLAN driver
[ 110.352507] wlan: Driver loaded successfully
**************************************************
Set the Wireless OK!
3. Scanning wireless
# iwlist scanning
Step4. connect a no-need-passwd AP, such as “TestAP”:
# iwconfig mlan0 essid "TestAP"
Step5. dynamic get a ip address:
# udhcpc -i mlan0
Step6. the connectivity test:
# ping www.baidu.com
3.10.2 Bluetooth Test
To use Marvel Bluetooth, please according to the following steps:
1. Connect the marverllWIFI module to M.2 interface under rsb-4221 board, the
supported module is sd8897.
2. After entering the linux system, insert the module for Bluetooth:
root@am335x-adv:~# insmod /unit_tests/Marverll_8897_driver/bt8xxx.ko
[ 28.790453] BT: Loading driver
[ 30.144483] BT FW is active(3)
[ 30.219309] BT: Create /dev/mnfcchar0
[ 30.369097] BT: Driver loaded successfully
3. Look the mac address of your Bluetooth device:
root@am335x-adv:~# hciconfig hci0
hci0: Type: BR/EDR Bus: SDIO
BD Address: 28:C2:DD:95:56:92 ACL MTU: 1021:7 SCO MTU: 120:6
UP RUNNING PSCAN
RX bytes:984 acl:0 sco:0 events:35 errors:0
TX bytes:794 acl:0 sco:0 commands:35 errors:0
Note. Mac address of rsb4221 marverllBluetooth is 28:C2:DD:95:56:92!
4. Send file throughtBluetooth
root@am335x-adv:~#ussp-push --debug --timeo 25 58:2A:F7:FE:4C:8F@ bt-
readme bt-readme
Note. 58:2A:F7:FE:4C:8F is the opposite device!
5. Receive file throught Bluetooth
obexpushd -B
Note. The file will be received under current directory