Advantech RSB-4221, User Manual

Page: 34 / 80

RSB-4221 User Manual 24
2.4 Quick Start Guide
2.4.1 Debug Port Connection
1. Connect the debug cable to the RSB-4221 debug port. (figure 2.3.1)
2. Connect the other side of the debug cable to USB-to-RS-232 cable then con-
nect to your PC.
2.4.2 Debug Port Setting
RSB-4221 can communicate with a host server by using serial cables. Common
serial communication programs such as HyperTerminal, Tera Term or PuTTY can be
used in this case. The examples below describe the serial terminal setup using
HyperTerminal on a Windows host:
1. Connect RSB-4221 with your PC by using a serial cable.
2. Open HyperTerminal on your Windows PC, and select the settings as shown in
Figure 2-7.
3. After the bootloader is programmed on the SD card, insert power adapter con-
nector to DC jack on RSB-4221 to power up the board. The bootloader prompt
is displayed on the terminal screen.
Figure 2.20 Hyper Terminal Settings for Terminal Setup