Advantech PPC-123, User Manual

Page: 89 / 174

75 Chapter 8
4. Click "Finish" to reboot
8.2.2 Installation for Windows NT
1. From "Start", select the "Settings group", then click on the
"Control Panel" icon.
2. In the "Control Panel", double click on the "Display" icon.
3. In the "Settings" screen, click on the "Display Type..." button.
4. From the "Display Type" screen, and in the "Adapter Type" section,
click on the "Change..." button.
5. In the "Change Display" screen, click on the "Have Disk..." button.
6. Insert the new display driver diskette into the A:\ drive, then click
on the "OK" button.
7. From the list of displayed S3 devices, select your S3 device.
8. From "Third-party Drivers", click on the "Yes" button to proceed.
9. If a message appears stating the driver is already installed on the
system, and asks if you want to use the current or new drivers, be
sure to select the "New" button.
10. If prompted for the driver diskette a second time, click on the "Con-
tinue" button.
11. When the message "The drivers were successfully installed" is dis-
played, remove the display driver diskette, then click on the "OK"
button.
12. Back at the "Display Type" window, click on the "Close" button.