Advantech PPC-120 User Manual Download

Page: 153 / 194

Chapter 10

Touchscreen

135

STEP 2 - COPY THE SOFTWARE

The following files are on the MonitorMouse for OS/2 disk:

!READ.ME!

Text file containing any additions or changes made

after this manual was printed.

MONMOU01.SYS Touchscreen driver for serial touchscreen controllers

on PC bus systems.

MONMOU02.SYS Touchscreen driver for serial touchscreen controllers

on Micro Channel systems.

MONMOU03.SYS Touchscreen driver for PC bus and Micro Channel

touchscreen controllers.

ELOCAL2.EXE

Touchscreen control panel software program used to

calibrate the touchscreen and to select options.

ELOCAL2.DLL

Used by ELOCAL2.EXE.

ELOCAL2.HLP

Help file for ELOCAL.EXE.

ELO.BMP

Elo desktop wallpaper.

@6253.ADF

Description file for the E271-2202 Micro Channel
touchscreen controller.

COMDUMP.EXE

DOS program for testing serial touchscreen
controllers.

BUSSTAT.EXE

DOS program for testing PC bus touchscreen
controllers.

SAWDUMP.EXE

DOS program for testing IntelliTouch touchscreen
controllers.

Create a subdirectory on your hard disk and copy the files into it. For
example:

CD \

MD ELO

COPY A:*.* ELO

International versions of the touchscreen control panel software program
are included in subdirectories on the MonitorMouse for OS/2 disk. Replace
ELOCAL2.DLL and ELOCAL2.HLP on your hard disk with the versions
from the appropriate subdirectory.

Summary of Contents for PPC-120



































































































































































































Search results

Summary of Contents for PPC-120

Reviews:

Related manuals for PPC-120

Brands by name

Popular brands

Advantech PPC-120, User Manual

Search results

Summary of Contents for PPC-120

Reviews:

Related manuals for PPC-120

Brands by name

Popular brands