Advantech PPC-120 User Manual Download Page 122

Page: 122 / 194

104

PPC-120/140

User's Manual

9.5 Chipset Features Setup

Note:

It is strongly recommended that setup items in this
section NOT be changed, because advanced
knowledge is required to effect such changes.

Figure 9-4: Chipset features setup screen

System BIOS Cacheable

When enabled, allows the ROM area FOOOH-FFFFH to be cacheable
when the cache controller is activated. The recommended setting is
"Disabled", especially for high speed CPUs (200 MHz and above).

Video BIOS Cacheable

When enabled, allows the system to use the video BIOS codes from
SRAMs, instead of the slower DRAMs or ROMs.

The options are: Enabled (Default), Disabled.

Summary of Contents for PPC-120



































































































































































































Search results

Summary of Contents for PPC-120

Reviews:

Related manuals for PPC-120

Brands by name

Popular brands

Advantech PPC-120, User Manual

Search results

Summary of Contents for PPC-120

Reviews:

Related manuals for PPC-120

Brands by name

Popular brands