Advantech POC-621 Series, User Manual

Page: 4 / 78

POC-621 Series User Manual iv
9. Improper installation of VESA mounting can result in serious personal injury!
VESA mount installation should be conducted by professional technician,
please contact the service technician or your retailer if you need this service.
The detail operating procedure specified on Appendix A.
10. CLASSIFICATION:
1). Class I internal powered
2). No applied part
3). Continuous operation
4). Not AP or APG category
11. Environmental protection: follow national requirements when disposing of this
unit.
12. Maintenance: to properly maintain and clean the surfaces, use only the
approved products or clean with a dry applicator.
13. Make sure the user not to contact SIP/SOPs and the patient at the same time.
14. When networking with electrical devices, the operator is responsible for ensur -
ing that the resulting system meets the requirements set forth by the following
standards:
– EN 60601-1 (IEC 60601-1)
Medical electrical equipment
Part 1: General requirements for safety
– EN 60601-1-1 (IEC 60601-1-1)
Medical electrical equipment
Part 1-1: General requirements for safety
Collateral standard: Safety requirements for Medical electrical systems
– EN 60601-1-2 (IEC 60601-1-2)
Medical electrical equipment
Part 1-2: General requirements for safety
Collateral standard: Electromagnetic compatibility; Requirements and tests
Caution!
The battery charging indicator is not Included in this device. It will be
added to the end system assembly and be shown in the end system.
Warning! This device is not suitable for use in the presence of flammable anes -
thetic mixture with air, oxygen, nitrous oxide, or for life support system.
Caution! When servicing the device, always use replacement parts that are quali -
fied to Advantech standards. Advantech Medical cannot warrant or
endorse the safe performance of third-party replacement parts for use
with our medical device.