Advantech PCM-26R1EC, User Manual

Page: 3 / 20

iii PCM-26R1EC User Manual
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend using shielded cables. This type
of cable is available from Advantech. Please contact your local supplier for ordering
information.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A dig -
ital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate
radio - frequency energy and, if not installed and used in accordance with the instruc -
tion manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his or her own expense.
FM
This equipment has passed FM certification. According to the National Fire Protec -
tion Association, work sites are classified into different classes, divisions, and groups
on the basis of hazard considerations. This equipment complies with the specifica -
tions of Class I, Division 2, Groups A, B, C , and D indoor hazards.
Technical Support and Assistance
1. Visit the Advantech website at www.advantech.com/support for the latest infor -
mation about this product.
2. Should you require additional assistance, contact your distributor, sales repre -
sentative, or Advantech's customer service center for technical support. Please
have the following information ready before you call:
– Product name and serial number
– Description of your peripheral attachments
– Description of your software (OS, version, application software, etc.)
– A complete description of the problem
– The exact wording of any error messages
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.

To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Do not touch any components on the CPU card or other
cards while the PC is on.
Disconnect the power before making any configuration changes. The power spike
that occurs as you connect a jumper or insert a card may damage sensitive electronic
components.