1 8
1 8
1 8
1 8
1 8
PCL-812PG User's Manual
2.1 Initial Inspection
Inside the shipping container, you should find this operating
manual and the PCL-812PG card. The PCL-812PG is carefully
inspected and tested (mechanically and physically) prior to
shipping. It should be free of marks and scratches and in perfect
working order upon delivery.
When unpacking, check the unit for signs of shipping damage
(damaged box, scratches, dents, etc.). If there is any damage to
the unit or it fails to meet specifications, notify our service
departmet or your local sales representative immediately. In
addition, report the damage to the carrier. Retain the shipping
carton and packing material for inspection by the carrier. We
will then make arrangements to repair or replace the unit.
Remove the PCL-812PG interface card from its protective
packaging by grasping the rear metal panel. Keep the anti-
vibration packing. Whenever you remove the card from the PC
expansion slot, store the card in the protective package.
Discharge any static electricity by touching the back of the
system unit before you handle the board. You should avoid
contact with materials that create static electricity such as plastic,
vinyl and styrofoam. The board should be handled on by its
edges to avoid static electricity discharge which could damage
the integrated circuits on the PCL-812PG.
2.2 Jumper Settings
The PCL-812PG is designed for ease of use. There is one DIP
switch and nine jumpers on the PCL-812PG card and the
functions of the switch and the jumpers are discussed in this
section. You may want to refer to Fig. 2.1 for the physical
location 5 of the switch and the jumpers.
