PCI-7031 User Manual
36
Serial Port 3/4/5/6 Address
This option configures serial port 3/4/5/6 base addresses. The following options
are also available:
–
Serial Port 3/4/5/6 IRQ
This option configures serial port 3/4/5/63/4/5/63/4/5/63/4/5/6 base IRQ.
3.3.4
Hardware Health Function
Figure 3.7 Hardware Health Configuration.
Hardware health function
Enable/Disable the onboard hardware monitor controller. If this option is
enabled, the BIOS and OBS utility can get the system board's health informa-
tion from hardware monitor controller.
Chassis Intrusion
Enable/Disable the Chassis Intrusion monitoring function. When the case is
opened, the buzzer beeps.
CPU warning temperature
Use this to set the CPU warning temperature threshold. When the system
reaches the warning temperature, the buzzer will beep.
ACPI Shut Down Temperature
This potion allows user to set the CPU temperature at that the system will auto-
matically shut down for preventing CPU from over heat damage.
Summary of Contents for PCI-7031
