PCI-7031 User Manual
24
2.18
ATX Feature connector(ATXF1)
The PCI-703I can support an advanced soft power switch function. When using an
ATX power supply, please follow the instructions below to enable ATX functions.
1.
Find ATX feature cable (1700002343).
2.
Connect the 3-pin plug of the cable to ATXF1 (ATX feature connector).
3.
Connect the power on/off button cable of the chassis to JPF1’s pins 9 and 10.
Default value is set ATXF1 to short pin1-2.
Important: Make sure that the ATX power supply can take at least a 10mA load on
the 5 V standby lead (5 VSB). If not, you may have difficulty powering on your sys-
tem.
2.19
ATX power control connector (ATX1)
ATXF1
JFP1
ATX1
Summary of Contents for PCI-7031
