Advantech PCI-1736UP, User Manual

Page: 20 / 48

PCI-1736UP User Manual 14
2.3 Hardware Installation
After the device driver installation is completed, you can now go on to
install the PCI-1736UP card in any PCI slot on your computer. But it is
suggested that you refer to the computer user manual or related documen-
tation if you have any doubt. Please follow the steps below to install the
card on your system.
1.
Turn off your computer and unplug the power cord and cables.
TURN OFF your computer before installing or removing any com-
ponents on the computer.
2. Remove the cover of your computer.
3. Remove the slot cover on the back panel of your computer.
4. Touch the metal part on the surface of your computer to neutralize
the static electricity that might be on your body.
5. Insert the PCI-1736UP card into a PCI slot. Hold the card only by
its edges and carefully align it with the slot. Insert the card firmly
into place. Use of excessive force must be avoided, otherwise the
card might be damaged.
6. Fasten the bracket of the PCI card on the back panel rail of the
computer with screws.
7. Connect appropriate accessories (44-pin cable, wiring terminals,
etc. if necessary) to the PCI card.
8. Replace the cover of your computer chassis. Re-connect the cables
you removed in step 2.
9. Plug in the power cord and turn on the computer .
Note Make sure you have installed the driver before
you install the card.
(please refer to 2.2 Driver Installation)