![background image](http://html1.mh-extra.com/html/advantech/pci-1602up/pci-1602up_user-manual_2857359027.webp)
17
PCI/ PCI Express-Communication
User Manual
Chapter 2
H
ardware
C
onfiguration
2.3
Jumper Settings
This section tells how to set the jumpers to configure your card. It gives the card
default configuration and your options for each jumper.
2.3.1
How to Set Jumpers
You configure your card to match the needs of your application by setting jumpers. A
jumper is the simplest kind of electric switch. It consists of two metal pins and a small
metal clip (often protected by a plastic cover) that slides over the pins to connect
them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you
remove the clip.
Sometimes a jumper will have three pins, labeled 1, 2 and 3. In this case you would
connect either pins 1 and 2 or 2 and 3.
You may find a pair of needle-nose pliers useful for setting the jumpers.
If you have any doubts about the best hardware configuration for your application,
contact your local distributor or sales representative before you make any changes.
Figure 2.13 How to Set Jumpers
2.3.2
Default Settings
The board is shipped with default settings. If you need to change these settings, how-
ever, see the following sections. Otherwise, you can simply install the card.
Table 2.1: PCI-1601/1602/1612/1622 and PCIe-1622 Settings
Model
Specifications
Default
Setting
Enable
Mode
Remarks
PCI-1601/1602
RS-422/485
RS-422* Auto
* means jumpers will provided
for terminator use and packed in
PE bag along with the card in
box.
PCI-1603
RS-232/Current loop RS-232 N/A
PCI-1610
RS-232
RS-232 N/A
PCI-1612
RS-232/422/485
RS-422* Auto
PCIe-1622
RS-232/422/485
RS-232* Auto
Summary of Contents for PCI-1602UP
