manualshive.com logo in svg

Advantech PCI-1202, User Manual

Share
Download
Advantech PCI-1202 User Manual Download Page 26

PCI-1202 User Manual

18

There are two types of DIO slave modules, one is a 3-wire type called 
ADAM-37xx, and the other is a flat-cable type called ADAM-37xxF. For 
the 3-wire type slave, there is a PCL-10136M connector onboard. The 
ADAM-3936 wiring terminal will be used together with this type of 
slave. ADAM-3936 supports 3 screw terminals for each input and output. 
The ADAM-37xx is very suitable for system integration and quick devel-
opment of machine prototypes.
ADAM-37xxF is an economic option for a DIO slave modules that is 
designed for customers that have their own I/O terminal boards.

3.2.4 Common Connector Pin Definitions

Communication Conn. RJ-45

Pin       Label     Description

1          NC          Filed Ground
2          NC          Filed Ground
3        RS485+ High Speed
                           RS-485 protocol
4          NC           Filed Ground
5          NC           Filed Ground
6        RS485-    High Speed
                            RS-485 protocol
7          NC           Filed Ground
8          NC           Filed Ground

External Power Input connector

Pin   Label     Description

1      24V        DC 24V
2      GND      DC 24V Ground
3      FG          Field Ground
4      24V        DC 24V
5      GND      DC 24V Ground
6      FG          Field Ground

Summary of Contents for PCI-1202





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands