manualshive.com logo in svg

Advantech PCA-6184, User Manual, Page: 47 / 116

Share
Download
Advantech PCA-6184 User Manual Download Page 47

39

momentarily (for less than 4 seconds) will switch the system to “suspend” 
mode.

3.7.6 CPU THRM-Throttling

This field allows you to select the CPU THRM-Throttling rate. The 
choices: 12.5%, 25.0%, 37.5%, 50.0%, 62.5%, 75.0%, 87.5%.

3.7.7 Power on by LAN

This item allows you to wake up the system via LAN from the remote-
host. The choices: Enabled, Disabled.

3.7.8 Power on by Ring

When Enabled, an input signal on the serial Ring Indicator (RI) line (in 
other words, an incoming call on the modem) awakens the system from a 
soft off state. The choices: Enabled, Disabled.

3.7.9 Power on by Alarm

When Enabled, your can set the date and time at which the RTC (real-
time clock) alarm awakens the system from Suspend mode. The choices: 
Enable, Disable.

3.8 PnP/PCI Configurations

3.8.1 PnP OS Installed

This features allows you to install the PnP OS. The commands are “yes” 
or “no.”

Figure 3.8: PnP/PCI configurations screen

Summary of Contents for PCA-6184





















































































































Reviews:

No comments