Advantech PCA-6179 User Manual Download Page 21

Page: 21 / 118

PCA-6179 User's Manual

1.3.3 Input/Output

• Bus interface: PCI/ISA bus, PICMG compliant

• Enhanced parallel port: Configurable to LPT1, LPT2, LPT3, or

disabled. Standard DB-25 female connector provided. Supports
EPP/ECP

• Serial ports: Two RS-232 ports with 16C550 UARTs (or

compatible) with 16-byte FIFO buffer. Supports speeds up to 115.2
Kbps. Ports can be individually configured to COM1, COM2 or
disabled

• Keyboard and PS/2 mouse connector: A 6-pin mini-DIN

connector is located on the mounting bracket for easy connection to
a keyboard or PS/2 mouse. An onboard keyboard pin header
connector is also available

• ISA driver current: 64 mA (High Drive)

1.3.4 VGA interface

• Supports AGP 4X, 133 MHz

• Controller: ATI 3D Rage 128 Pro 4XL

• Display memory: 8 MB VRAM

1.3.5 SCSI interface

• PCI SCSI: Supports 32-bit PCI interface and Ultra2 SCSI or legacy

single-ended devices; data transfer up to 80 MB/sec.

• Chipset: Symbios SYM53C895

1.3.6 Ethernet LAN

• Supports 10/100Base-T Ethernet networking

• Chipset: Realtek 8139C

1.3.7 Solid state disk

• Supports DOC

2000 up to 144 MB

Summary of Contents for PCA-6179























































































































Search results

Summary of Contents for PCA-6179

Reviews:

Related manuals for PCA-6179

Brands by name

Popular brands

Advantech PCA-6179, User Manual

Search results

Summary of Contents for PCA-6179

Reviews:

Related manuals for PCA-6179

Brands by name

Popular brands