Advantech PCA-6166, User Manual

Page: 99 / 132

Chapter 7 SiS IDE Driver Installation 87
7.2 Installation for Windows NT 4.0
1. Enter Windows NT 4.0 System.
2. Double click the "My Computer" icon on the Desktop.
3. Double click the "Control Panel" icon in "My Computer".
4. Double click the "SCSI Adapters" icon in "Control Panel".
5. Click on the folder tab labeled "Drivers" in "SCSI Adapters". The
currently installed SCSI adapter drivers will be listed in the
Drivers menu.
The display should list the default ATAPI driver, "IDE CD-ROM
(ATAPI 1.2)/Dual-channel PCI IDE Controller".
6. Select "Remove" to remove the driver, and then click "Yes" in the
"Remove menu.
7. Select "Add..." to add a new driver.
8. Insert the SiS IDE Driver diskette into floppy A or CD-ROM
Drive and click "Hard Disk" in "Install Driver" window.
9. Change path to "NT" (floppy A) or "D:\ IDE\NT" (CD-ROM
drive), and click "OK" in the "Install From Disk" window.
N.B. Assuming that the D drive is the CD-ROM drive.
10. Choose "SiS PCI MASTER IDE MINIPORT DRIVER" in
"Install Driver" and click "OK".
11. Change path to "NT" (floppy A) or "D:\IDENT" (CD-ROM
Driver), and click "Continue" in the "Windows NT Setup"
window.
12. Click "Yes" in the "System Settings Change" window to restart
the computer.