manualshive.com logo in svg

Advantech PCA-6166, User Manual

Share
Download
Advantech PCA-6166 User Manual Download Page 51

Chapter 3  Award BIOS Setup

39

3.4.9 PCI/VGA Palette Snoop

Some display cards that are nonstandard VGA, such as graphics
accelerators or MPEG Video Cards, may not show colors properly.
The setting Enabled should correct this problem. Otherwise, leave this
on the setup default setting of Disabled.

3.4.10 OS Select for DRAM > 64MB

This setting is under the OS/2 system.

3.4.11 Video BIOS Shadow

This determines whether video BIOS will be copied to RAM, which is
optional according to the chipset design. When enabled, Video BIOS
Shadow increases the video speed.

3.4.12 C8000-CBFFF Shadow / DC000-DFFFF Shadow

These determine whether optional ROM will be copied to RAM in
blocks of 16 KB.

Enabled

Optional shadow is enabled.

Disabled Optional shadow is disabled.

3.4.13 Cyrix 6 x 86/MII CPUID

This setting is for a Cyrix CPU only. If you do not use a Cyrix CPU,
you must set this as the default setting, Enabled.

Enabled

The system cannot install network 5.0

Disabled The software cannot use MMX infrastructure.

Summary of Contents for PCA-6166





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands