Advantech PCA-6154 User Manual Download Page 3

Page: 3 / 86

Preface and Table of Contents

Packing List

Before installing your board, ensure that the following materials have
been received:

• 1 PCA-6154/6154L all-in-one single board computer

• 2 utility disks with Ethernet utility programs (PCA-6154 only)

• 1 utility disk with IDE utility programs

• 6 utility disks with SVGA utility programs and drivers for

Windows 3.1/95/NT and OS/2

• 1 hard disk drive (IDE) interface cable (40-pin)

• 1 floppy disk drive interface cable (34-pin)

• 1 parallel port adapter (26-pin) and COM2 adapter (9-pin) kit

• 1 USB cable

• 1 CPU fan with heat sink

• 1 CPU cooling fan for PGA socket Pentium

MMX use

• 1 6-pin mini-DIN keyboard & PS/2 mouse adapter

• 1 warranty certificate

If any of these items are missing or damaged, contact your distributor
or sales representative immediately.

Optional Devices

• IrdA adapter (part#: 968900042)

Summary of Contents for PCA-6154























































































Search results

Summary of Contents for PCA-6154

Reviews:

Related manuals for PCA-6154

Brands by name

Popular brands

Advantech PCA-6154, User Manual

Search results

Summary of Contents for PCA-6154

Reviews:

Related manuals for PCA-6154

Brands by name

Popular brands