Chapter 5 PCI SVGA Setup
47
Step 3
1. Upon restarting your computer, select the desired display settings
from the Display Property dialog box.
2. Click on Test to test the newly selected graphics mode. A color
test screen should appear, followed by the Testing Mode window.
3. Click on Yes to continue. The Display Settings Change window
will appear.
4. Click on Restart Now for the new settings to take effect.
5.6
OS/2 Drivers Setup Procedure
Preliminary Steps
The following steps must be performed before you install the SIS5598
display driver:
1. OS/2 DOS Support must be installed.
2. If you previously installed SVGA support, you must reset the
system to VGA mode. VGA is the default video mode enabled
when OS/2 is installed.
To restore VGA mode, use Selective Install and select VGA for
Primary Display. For more information on this procedure, see the
section on Changing Display Adapter Support in the OS/2 User's
Guide.
Installing from Diskette
To install this driver:
1. Open an OS/2 full screen or windowed session.
2. Place the SIS5598 Display Driver Diskette in Drive A.
3. At the OS/2 command prompt, type the following commands to
copy the files to the OS/2 drive:
