Advantech PCA-6005-B User Manual Download Page 16

Page: 16 / 128

PCA-6005-B User’s Manual

1.3 General Specifications

1.3.1 System

•

CPU:

Intel socket 478 Celeron® up to 2.2 GHz, Pentium® 4 up to

3.06 GHz, FSB 400/533 MHz; suppports Intel Hyper-Threading tech-
nology

•

BIOS:

Award Flash BIOS, 4 Mb

•

System Chipset:

SiS 651

•

Enhanced IDE hard disk drive interface:

Supports up to four IDE

large hard disk drives or other enhanced IDE devices. Supports PIO
mode 4 (16.67 MB/s data transfer rate) and ATA 33/66/100/133 (33/66/
100/133MB/s data transfer rate.) BIOS enabled/disabled.

•

Floppy disk drive interface:

Supports up to two floppy disk drives,

5º" (360 KB and 1.2 MB) and/or 3¾" (720 KB, 1.44 MB, and 2.88
MB). BIOS enabled/disabled

1.3.2 Memory

•

RAM:

Up to 2 GB in two available 184-pin DIMM sockets. Supports

DDR200/266/333-compliant DDR SDRAM

• No ECC support

1.3.3 Input/Output

•

Bus interface:

PCI bus only, mechanically compliant with PICMG

•

Enhanced parallel port:

Configurable to LPT1, LPT2, LPT3, or dis-

abled. Standard DB-25 female connector provided. Supports EPP/ECP

•

Serial ports:

Two RS-232 ports with 16C550 UARTs (or compatible)

with 16-byte FIFO buffer. Supports speeds up to 115.2 Kbps. Ports can
be individually configured to COM1, COM2 or disabled

•

Keyboard and PS/2 mouse connector:

A 6-pin mini-DIN connector is

located on the mounting bracket for easy connection to a keyboard or
PS/2 mouse. An onboard keyboard pin header connector is also avail-
able

•

ISA bus:

No ISA bus support

Summary of Contents for PCA-6005-B

































































































































Search results

Summary of Contents for PCA-6005-B

Reviews:

Related manuals for PCA-6005-B

Brands by name

Popular brands

Advantech PCA-6005-B, User Manual

Search results

Summary of Contents for PCA-6005-B

Reviews:

Related manuals for PCA-6005-B

Brands by name

Popular brands