Advantech PCA-6005-B User Manual Download Page 47

Page: 47 / 128

3.5.1 Advanced DRAM control 1

This item allows you to control the DRAM speed.

3.5.1.1 System performance

This item should be set at "Normal Mode" to ensure system stabil-

ity.

3.5.1.2 CAS Latency Setting

This item is used to adjust the CAS latency. Default setting is 2.5T.

3.5.1.3 DRAM Addr/Cmd Rate

This item is set at "AUTO". It is not recommended to change the

setting.

3.5.2 Prefetch Caching

This item allows to enable/disable the PCI bus prefectch caching. Default
is disabled.

3.5.3 System BIOS Cacheable

Selecting Enabled allows caching of the system BIOS ROM at F0000h-
FFFFFh, resulting in better system performance. The choice: Enabled,
Disabled.

3.5.4 Video RAM Cacheable

This item allows to cache Video RAM. Default is "Enabled."

Summary of Contents for PCA-6005-B

































































































































Search results

Summary of Contents for PCA-6005-B

Reviews:

Related manuals for PCA-6005-B

Brands by name

Popular brands

Advantech PCA-6005-B, User Manual

Search results

Summary of Contents for PCA-6005-B

Reviews:

Related manuals for PCA-6005-B

Brands by name

Popular brands