Advantech MIO-5377 User Manual Download Page 72

Page: 72 / 76

MIO-5377 User Manual

4.1.6

Save & Exit



Save Changes and Exit

This item allows you to exit system setup after saving the changes.



Discard Changes and Exit

This item allows you to exit system setup without saving any changes.



Save Changes and Reset

This item allows you to reset the system after saving the changes.



Discard Changes and Reset

This item allows you to rest system setup without saving any changes.



Save Changes

This item allows you to save changes done so far to any of the options.



Discard Changes

This item allows you to discard changes done so far to any of the options.



Restore Defaults

This item allows you to restore/load default values for all the options.



Save as User Defaults

This item allows you to save the changes done so far as user defaults.



Restore User Defaults

This item allows you to restore the user defaults to all the options.



Boot Override

Boot device select can override your boot priority.

Summary of Contents for MIO-5377













































































Search results

Summary of Contents for MIO-5377

Reviews:

Related manuals for MIO-5377

Brands by name

Popular brands

Advantech MIO-5377, User Manual

Search results

Summary of Contents for MIO-5377

Reviews:

Related manuals for MIO-5377

Brands by name

Popular brands