Advantech MIC-3351, Startup Manual

Page: 40 / 83

3 0 MIC-3351 User's Manual
4.1 Introduction
The MIC-3351 uses an Intel C&T 69000 chipset as its VGA controller.
The VGA controller has an integrated 2 MB SDRAM operating at 83
MHz, and can drive CRT displays with resolutions up to 1024 x 768 at
64 K colors. It supports interlaced and non-interlaced analog monitors
(color and monochrome VGA) in high-resolution modes while main-
taining complete IBM VGA compatibility. Digital monitors (i.e. MDA,
CGA, and EGA) are NOT supported. Multiple frequency (multisync)
monitors are handled as if they were analog monitors.
4.2 Installation of SVGA Driver
The MIC-3351 is supplied with a utility CD-ROM disc that holds the
necessary file for setting up the VGA display under the directory
\MIC-3000\69000. The contents and pathnames of this directory are
listed below:
• MIC3000\69000\Win31: VGA utility for Windows 3.1
• MIC3000\69000\Win95\w95500: VGA utility for Windows 95
• MIC3000\69000\Win98\w98600: VGA utility for Windows 98
• MIC3000\69000\WinNT40: Utility for Windows NT 4.0
Complete the following steps to install the SVGA driver. Follow the
procedures in the flow chart that apply to the operating system you
are using with your MIC-3351. The instructions below assume your
CD-ROM drive name is D.
Important: The following windows illustrations are examples only.
You must follow the flow chart instructions and pay
attention to the instructions which then appear on
your screen.
Note: <Enter> means pressing the “Enter” key on the
keyboard.