Advantech MIC-3351, Startup Manual

Page: 31 / 83

Chapter 2 Connecting Peripherals 2 1
Table 2-1: MIC-3351 serial port default settings
Port Address Default
COM1 3F8, 2F8, 3E8, 2E8 3F8/IRQ4
COM2 3F8, 2F8, 3E8, 2E8 2F8/IRQ3
2.8 Ethernet Configuration (CN9)
The MIC-3351 is equipped with a high performance 32-bit PCI-bus Fast
Ethernet interface which is fully compliant with IEEE 802.3u 10/
100Base-TX specifications. It is supported by all major network
operating systems and is 100% Novell NE-2000 compatible. One on-
board RJ-45 jack provides convenient connection to the network.
The medium type can be configured via the software program included
on the utility CD-ROM disc. (See Chapter 3 for detailed information.)
2.9 USB Connector (CN4)
The MIC-3351 provides two USB (Universal Serial Bus) interfaces,
which give complete plug and play, hot attach/detach for up to 127
external devices. The USB interfaces comply with USB specification
rev. 1.0 and are fuse protected.
The USB interfaces can be disabled in the system BIOS setup.
2.10 Ultra2 Wide SCSI Interface (CN10)
The MIC-3351S has a 68-pin, dual in-line connector for Ultra2 Wide
SCSI devices. Connection of SCSI devices requires special attention,
especially when determining the last drive on the SCSI chain. Refer to
Chapter 5 and your device's operating manual for detailed installation
advice.
2.11 Card Installation
The CompactPCI connectors are firm and rigid, and require careful
handling while plugging and unplugging. Improper installation of a
card can easily damage the backplane of the chassis.