Advantech ITA-5831 Series User Manual Download Page 48

Page: 48 / 96

ITA-5831 User Manual

This item allows users to enable/disable support for more than two frequency
ranges. The default setting is “enabled”.



CPU C States

This item allows users to enable/disable CPU C states. The default setting is
“enabled”.

4.4.6

SATA Configuration



SATA Controller(s)

This item allows users to enable/disable SATA controllers. The default setting is
“enabled”.



SATA Mode Selection

This item allows users to set the SATA mode as AHCI or RAID. The default set-
ting is “AHCI”.



SATA Port 0/1/2/MSATA

This item allows users to enable/disable the SATA ports. The default setting is
“enabled”.



Hot Plug

This item allows users to enable/disable hot plugging. The default setting is
“enabled”.

Summary of Contents for ITA-5831 Series

































































































Search results

Summary of Contents for ITA-5831 Series

Reviews:

Related manuals for ITA-5831 Series

Brands by name

Popular brands

Advantech ITA-5831 Series, User Manual

Search results

Summary of Contents for ITA-5831 Series

Reviews:

Related manuals for ITA-5831 Series

Brands by name

Popular brands