Advantech ITA-5831 Series User Manual Download Page 45

Page: 45 / 96

ITA-5831 User Manual

Chapter 4

IOS Settings

4.4.4.1

Serial Port 1/2 Configuration



Serial Port

This item allows users to enable/disable the serial port. The default setting is
“enabled”.



Device Settings

This item allows users to view the I/O ports in operation and the IRQ number.



Change Settings [1]

This item allows users to optimize the serial port settings (I/O port and IRQ). The
default setting is “auto”.



Change Settings [2]

This item allows users to optimize the serial port settings (full/half duplex). The
default setting is “standard serial port mode”.



Serial Port Mode

This item allows users to select the serial port mode (RS-232 or RS-485). The
default setting is “RS-232”.

Summary of Contents for ITA-5831 Series

































































































Search results

Summary of Contents for ITA-5831 Series

Reviews:

Related manuals for ITA-5831 Series

Brands by name

Popular brands

Advantech ITA-5831 Series, User Manual

Search results

Summary of Contents for ITA-5831 Series

Reviews:

Related manuals for ITA-5831 Series

Brands by name

Popular brands