Advantech IPPC-6152A User Manual Download Page 56

Page: 56 / 72

IPPC-6152A/6172A/6192A User Manual

USB Precondition [Disabled]

The default configuration is disabled. Users can enable it according to their

requirements.

XHCI Mode [Auto]

The default configuration is disabled. Users can enable it according to their

requirements.

BTCG [Enabled]

The default configuration is enabled.



PCH Azalia Configuration

Azalia [Auto] is set as auto detection by default. Users can enable or disable it
according to their requirements.

LAN1 Controller [Enabled]

The default configuration of LAN1 port is enabled.

LAN1 PXE OpROM [Disabled]

LAN1 PXE OpROM function is disabled by default.

Wake On LAN [Disabled]

Wake On LAN function is disabled by default.

LAN2 Controller [Enabled]

The default configuration of LAN2 port is enabled.

LAN2 PXE OpROM [Disabled]

LAN2 PXE OpROM function is disabled by default.

PCIE Wake [Disabled]

PCIE Wake function is disabled by default. Users can enable it according to

their requirements.

RestoreAC Power LOSS [Power Off]

The default configuration is disabled. Power on when alternating current

turns down, and the device will not restart. Users can configure it as Power
On or Last State according to their requirements.

Summary of Contents for IPPC-6152A









































































Search results

Summary of Contents for IPPC-6152A

Reviews:

Related manuals for IPPC-6152A

Brands by name

Popular brands

Advantech IPPC-6152A, User Manual

Search results

Summary of Contents for IPPC-6152A

Reviews:

Related manuals for IPPC-6152A

Brands by name

Popular brands