Product Operation
Manual Backup and Restore
1. Please ensure that “Auto Mode” is turned off
before connecting the ICE-9NKY series device to
the switches. To disable this function, log into the
switch web console and navigate to Switch > Tools
> N-Key, then uncheck the “Auto Mode” option.
2. After Auto Mode is disabled, the N-Key Status
dropdown menu with three options will be shown.
Status
Description
N-Key is idle
Do nothing
Backup the current
configuration to N-Key
Backup the current
configuration settings to
N-Key
Restore the N-Key
configuration settings to
the switch
Restore the N-Key
configuration settings to the
switch
3. After selecting the N-Key Status from the
dropdown menu, click Apply. The ICE-9NKY
series device will then begin the configuration
backup/restore process, during which the system
LED will blink slowly. The process may take 1 ~ 2
minutes to complete.
4. When the system LED stops blinking, the
ICE-9NKEY series device can be disconnected
from the switches.
WARNING
Do not remove the ICE-9NKY series device
while the SYS LED is blinking.
Ensure that the switches are powered on before
initiating the automatic backup function.
Startup Manual 3