![background image](http://html1.mh-extra.com/html/lanpro/lp-f30f/lp-f30f_user-manual_3585074001.webp)
LPF30F_UG_ENB01W
www.lanpro.com
User Guide for SC Field Installable
LP-F30F Connectors (0.9mm type)
Step 1:
Insert the boot
into the buffer.
Step 3:
Strip off the
buffer and 250 um
coating till
Mark 1
,
and keep 125um fiber.
Step 5:
Press the LP-F30F tool and then insert the 125 um fiber to reach the
innermost until the buffer make a curve. Then release the tool and check if this
buffer is tight.
Step 7:
Release the tape to take out the LP-F30F connector, and done.
Step 2:
Make marks
on buffer according
to the length chart.
(
Mark 1:
The starting
point to strip the buffer.
Mark 2:
Check point)
Step 4:
Follow the
LP-F30TOOL FIBEr
CUTTEr MaNUaL
to cut the fiber
Step 6:
Move the boot
toward to the stopper.
MARK 2
MARK 1